Skip to content 
Last updated: November 2026 · By Dynamic EE Zone, authorized Signal Fire distributor in Puchong
Quick answer: For most FTTH installers in Malaysia, a core-alignment fusion splicer in the RM1,800 to RM3,400 range is the right choice. Signal Fire’s AI-5P (RM1,800) suits new or part-time installers, the AI-8C (RM3,099) and AI-9 (RM3,399) suit full-time FTTH and backbone contractors, and the AI-30 (RM5,499) is for teams that splice all day. Just as important: buy from a seller with local service and spare parts, because electrodes, batteries and repairs will be needed.
Signal Fire fusion splicer prices in Malaysia
Prices at Dynamic EE Zone at the time of writing:
| Model | Price | Best for |
|---|---|---|
| Signal Fire AI-5P | RM1,800 | Entry-level core alignment. New installers, small jobs, backup machine |
| Signal Fire AI-6A+ | RM2,299 | Everyday FTTH installation |
| Signal Fire AI-8C | RM3,099 | Full set, 6-motor core alignment. Full-time FTTH contractors |
| Signal Fire AI-9 | RM3,399 | Fully automatic core alignment. Contractors doing FTTH and backbone work |
| Signal Fire AI-30 | RM5,499 | Top of the range. High-volume teams and project work |
All models are available to see and try at our walk-in store in Bandar Kinrara, Puchong.
Core alignment vs cladding alignment: what is the difference?
- Core alignment machines use cameras and multiple motors to line up the fibre core itself. This gives lower, more consistent splice loss and is the standard for professional FTTH and backbone work.
- Cladding alignment machines line up the outer glass layer only. They are cheaper but less accurate, and the result depends more on fibre quality.
If you are splicing for TM or other ISP projects, or for any job where the splice will be tested with an OTDR, choose core alignment. All the Signal Fire models above are core-alignment machines.
7 things to check before buying a fusion splicer
- Alignment type. Core alignment for professional work (see above).
- Number of motors. More motors (for example, 6) give finer alignment control and more consistent results.
- Splice and heating time. Faster cycles matter when you do dozens of splices per day.
- Battery capacity. Count how many splice-and-heat cycles you get per charge, and whether spare batteries are easy to buy.
- Electrode life. Electrodes wear out and must be replaced. Make sure replacements are available locally.
- Included accessories. A full set should include a cleaver, stripper, cooling tray, carry case and charger. A poor cleaver ruins good splices.
- Local warranty and service. A splicer is a precision instrument. Buying from an authorized distributor and service centre in Malaysia means faster repairs and genuine parts instead of shipping the machine overseas.
Don’t forget the cleaver
Splice quality depends on a clean, flat cleave as much as on the machine. Fibre cleavers in Malaysia range from about RM16 for basic FTTH cleavers to RM490 for high-precision models such as the PRO’SKIT FB-1688C. If you do a lot of splicing, a high-precision cleaver with a long-life blade will pay for itself. See our cleaver range.
Should you buy or rent a fusion splicer?
- Buy if you splice every week. Even an entry-level machine pays for itself within a few jobs.
- Rent if you have a one-off project or are waiting for your own machine to be repaired. Dynamic EE offers fusion splicer rental. WhatsApp us for current availability and rates.
Frequently asked questions
What is the best fusion splicer for FTTH in Malaysia?
For most full-time FTTH installers, a 6-motor core-alignment splicer such as the Signal Fire AI-8C (RM3,099) or AI-9 (RM3,399) offers the best balance of price, speed and accuracy. New installers on a budget can start with the AI-5P at RM1,800.
How much does a fusion splicer cost in Malaysia?
Professional core-alignment fusion splicers in Malaysia cost from about RM1,800 to RM5,500. Very cheap machines below this range are usually cladding-alignment models.
Where can I service or repair my Signal Fire splicer in Malaysia?
Dynamic EE Zone in Puchong, Selangor is an authorized Signal Fire distributor and service centre. We stock electrodes, batteries and spare parts. See fusion splicer parts and accessories.
Can I try the machine before buying?
Yes. Visit our store at 37G, Jalan DU 1/2, Bandar Kinrara, 47180 Puchong, Selangor, Monday to Saturday, 9 AM to 6 PM.
Not sure which model fits your work? WhatsApp 016-203 9260 with the type of jobs you do and we will recommend one. See all splicing machines →
